DVA7630
First Officer, MD-88
Joined on February 21 2009
Midwestern United States
5 legs, 6.9 hours
|
Posted onPost created on
August 11 2009 08:56 ET by Mahmoud Nofal
|
Hello to All!!
I have been having problems with my Wilco A330-340 series. It seems that whenever I climb above, say, 50ft. The aircraft does not turn! This includes both yaw and roll. However, the autopilot works fine. The user level is set to Beginner. I tried to contact Wilco many times with this issue, but all I get is an automated message about program compatibility.I have a Vista 64 bit system. Can someone help? Thanks.
Mahmoud NofalFirst Officer, MD-88
|
|
DVA5544
Captain, A320
Joined on February 07 2008
"I'm at a 15° chin-up attitude." Spiez, Bern Schweiz
34 legs, 58.3 hours
24 legs,
34.9 hours ACARS
|
Posted onPost created on
August 11 2009 15:29 ET by Alexander Kolb
|
DVA7630
First Officer, MD-88
Joined on February 21 2009
Midwestern United States
5 legs, 6.9 hours
|
Posted onPost created on
August 11 2009 16:24 ET by Mahmoud Nofal
|
No, I tried this, but the same problem persists. Once again, under autopilot and on the ground, the plane works fine, but over about 50-100ft, I cannot roll or yaw! And, If anyone else has this problem, is the same so with othe Wilco/Fly-by-wire aircraft. Thanks
Mahmoud NofalFirst Officer, MD-88
|
|